Placing Knotless Suture Anchor Through Mid-Glenoid Portal
Main Text
Table of Contents
Optimal portal placement for arthroscopic shoulder stabilization procedures can significantly aid a surgeon’s visualization during the repair as well as suture anchor placement. A percutaneous knotless anchor insertion kit used through a mid-glenoid portal allows the surgeon to access positions on the glenoid rim that are commonly difficult to reach. Moreover, the knotless kit has the ability to save valuable time during arthroscopic stabilization procedures and also eliminates the risk of postoperative knot impingement. The mid-glenoid portal should be made approximately 1 cm lateral from the joint line of the humeral head and 2–3 cm inferior and 1–2 cm medial from the posterolateral acromial angle. This portal placement avoids injury to the labrum and should be determined after assessing both the thickness of the local soft tissues and the size of the relevant bony architecture. A hole for the knotless anchor should be drilled approximately 1–2 mm onto the face of the glenoid, and the labral tape is then passed a short distance through the eyelet of the knotless fixation device before the construct is inserted into the glenoid. A hemostat is used to hold the tape as it is placed into the drill hole, and a mallet is used to drive the interference portion of the plastic implant to a marked depth. Finally, once the suture anchor is securely affixed, the insertion device is unloaded and pulled out of the portal with 6 counterclockwise turns.
Shoulder; knotless suture anchor; mid-glenoid portal; percutaneous kit; labrum.
Traumatic anterior shoulder instability often results in the compromise of both the anterior labrum and the anterior capsule, causing a traditional Bankart lesion. Bankart lesions have a prevalence of 97% in all first-time dislocators, which can predispose the patient to recurrent instability.1 Other risk factors that predispose the patient to recurrent instability are young age at the time of the initial event (less than 20 years of age), participation in a competitive sport, playing a sport that is overhead or includes impact, preoperative shoulder laxity and signs on plain radiographs significant for instability (Hill-Sachs and loss of glenoid contour).2 Multi-center trials have shown that patients who receive treatment earlier in their course of instability (i.e. the first-time dislocator) are more likely to undergo an arthroscopic Bankart repair and are less likely to have bone loss or other biceps pathology.3 With a thorough preoperative workup and careful patient selection, arthroscopic Bankart repairs have shown recurrence rates of 8% at 2-year follow up and 22% at mean follow-up of 6.3 years.4,5
A 16-year-old competitive male skier presented to the orthopedic clinic after having sustained a fall and dislocation of the right shoulder. The patient is otherwise healthy and has had no prior injuries to the shoulder nor has he had any dislocation of the left shoulder. The injury happened 1 week prior to presenting to the clinic and the patient has been using a sling for comfort since that time. His chief complaint at this time is instability of the shoulder as well as a lack of confidence throughout range of motion.
The patient is a well-appearing male without signs of abrasions or ecchymosis to the shoulder. The patient is neurovascularly intact to include endorsing normal sensation to the axillary dermatome and full strength of the deltoid and rotator cuff muscles. He reports apprehension when his arm is abducted and externally rotated and has relief of symptoms when a posterior force is applied to the proximal humerus. He has grade I instability (humerus to the glenoid rim) with an anterior load and shift test. He has no pain with the Kim and jerk tests and does not have a sulcus.
A standard shoulder series (AP/Grashey/Axillary/Scapular Y) is obtained and demonstrates a well-reduced glenohumeral joint without superior humeral migration and a normal acromiohumeral distance. There is no obvious Hill-Sachs nor is there loss of glenoid contour/signs of anterior bone loss. Furthermore, no bony-Bankart or signs of fracture can be identified. An MRI of the right shoulder without contrast demonstrates undermining of the anterior labrum without a periosteal avulsion or medialization of the labrum along the glenoid neck. The biceps is intact without signs of a SLAP lesion.
Young male patients under the age of 20 have recurrent rates ranging from 66–100%.6 Recurrent shoulder instability not only predisposes to bone loss, but Hovelius et al. have shown higher rates of instability arthropathy at 25 years after dislocation (40% with recurrence versus 18% without recurrence).7
Non-operative management with the use of a sling and shoulder rest has been discussed by various authors. Although clinical evidence is controversial, Itoi et al. have shown a decrease in relative risk of recurrence by 46% if the patient is immobilized in external rotation.8 Furthermore, long-term studies have shown that at 2, 5, 10 and 25 years, 50% of patients have recurrent instability events if treated nonoperatively, with the majority recurring within the first 2 years after the seminal event.9
A thorough discussion of risks, benefits and expected outcomes were discussed at length with the patient. An 18-year-old equivalent male through predictive modeling has been shown to have a 77% risk of recurrence at 1 year, which decreased to a 17% risk at 1 year with surgical stabilization.10 The patient and his family felt that the risk of recurrence was unacceptably high and they elected to proceed with arthroscopic Bankart repair after the first-time dislocation.
Arthroscopic Bankart repair in the setting of traumatic anterior shoulder instability has been shown to decrease risk of recurrence.3-5,10 Surgical techniques continue to advance in terms of utilization of accessory portals and technological advances with anchor types.
Wolf et al. described the first arthroscopic Bankart repair with the use of a posterior viewing portal and 2 anterior working portal Mitek anchors that required knot tying.11 Techniques continue to utilize 2 anterior working portals in varied positions (i.e. high anterior rotator interval, mid-glenoid, and 5:30 trans-subscapularis portal) with good to excellent results and highly dependent on the operator.12 Furthermore, recent techniques have described utilizing a single anterior portal with the benefit of reduced pain, shorter surgical time and shorter learning curve, all with the same results compared to historical controls.13-15 Surgeons should be aware of possible shortcomings of portal placement and utilize new curved guides when appropriate to avoid posterior cortex perforation.16 The senior author advocates for the use of an accessory rotator interval portal as well as a mid-glenoid working portal.
Knotless anchors have been shown to have equivalent clinical outcomes when compared to the gold standard Bankart repair with traditional suture anchors that require knot tying.17-19 Furthermore, knotless anchors have many purported benefits. A successful Bankart repair with knot tying solely relies upon knot security and maintained tissue tension, which can be operator-dependent and variable. As a result, knotless anchors offer a solution to avoid the weakness in traditional Bankart repair techniques.20 Furthermore, a known complication of knot tying in a traditional Bankart repair is knot arthropathy, where the suture can actually abrade the cartilage surface of the glenoid and humeral head.21,22 As a result, a knotless Bankart repair construct offers an alternative option for the surgeon to produce reliable results without the possible complications associated with knot tying.
- 3.0-mm Arthrex Knotless SuturTac Anchors
- Standard orthopaedic operative table
- Bean bag for lateral position
- Arthrex Shoulder Suspension System
Matthew T. Provencher has the following disclosures to report: Is a paid consultant for Arthrex and the Joint Restoration Foundation (Allosource); receives intellectual property royalties from Arthrex; receives publishing royalties from SLACK Inc; is an editorial or governing board member for Arthroscopy, Knee, Orthopedics, and SLACK Inc; and is a board or committee member for AANA, AAOS, AOSSM, ASES, ISAKOS, the San Diego Shoulder Institute, and the Society of Military Orthopaedic Surgeons.
All other authors (LAP. and TJD) have no disclosures to report.
The patient referred to in this video article has given their informed consent to be filmed and is aware that information and images will be published online.
Citations
- Taylor DC, Arciero RA. Pathologic changes associated with shoulder dislocations: arthroscopic and physical examination findings in first-time, traumatic anterior dislocations. Am J Sports Med. 1997;25(3):306-311. doi:10.1177/036354659702500306.
- Balg F, Boileau P. The instability severity index score. A simple pre-operative score to select patients for arthroscopic or open shoulder stabilisation. J Bone Joint Surg Br. 2007;89-B(11):1470-1477. doi:10.1302/0301-620X.89B11.18962.
- Rugg CM, Hettrich CM, Ortiz S, Wolf BR; MOON Shoulder Instability Group, Zhang AL. Surgical stabilization for first-time shoulder dislocators: a multicenter analysis. J Shoulder Elbow Surg. 2018;27(4):674-685. doi:10.1016/j.jse.2017.10.041.
- Vermeulen AE, Landman EBM, Veen EJD, Nienhuis S, Koorevaar CT. Long-term clinical outcome of arthroscopic Bankart repair with suture anchors. J Shoulder Elbow Surg. 2018. doi:10.1016/j.jse.2018.09.027.
- Hohmann E, Tetsworth K, Glatt V. Open versus arthroscopic surgical treatment for anterior shoulder dislocation: a comparative systematic review and meta-analysis over the past 20 years. J Shoulder Elbow Surg. 2017;26(10):1873-1880. doi:10.1016/j.jse.2017.04.009.
- Robinson CM, Howes J, Murdoch H, Will E, Graham C. Functional outcome and risk of recurrent instability after primary traumatic anterior shoulder dislocation in young patients. J Bone Joint Surg Am. 2006;88(11):2326-2336. doi:10.2106/JBJS.E.01327.
- Hovelius L, Saeboe M. Neer Award 2008: Arthropathy after primary anterior shoulder dislocation—223 shoulders prospectively followed up for twenty-five years. J Shoulder Elbow Surg. 2009;18(3):339-347. doi:10.1016/j.jse.2008.11.004.
- Itoi E, Hatakeyama Y, Kido T, et al. A new method of immobilization after traumatic anterior dislocation of the shoulder: a preliminary study. J Shoulder Elbow Surg. 2003;12(5):413-415. doi:10.1016/S1058-2746(03)00171-X.
- Hovelius L, Olofsson A, Sandström B, et al. Nonoperative treatment of primary anterior shoulder dislocation in patients forty years of age and younger: a prospective twenty-five-year follow-up. J Bone Joint Surg Am. 2008;90(5):945-952. doi:10.2106/JBJS.G.00070.
- Mather RC III, Orlando LA, Henderson RA, Lawrence JTR, Taylor DC. A predictive model of shoulder instability after a first-time anterior shoulder dislocation. J Shoulder Elbow Surg. 2011;20(2):259-266. doi:10.1016/j.jse.2010.10.037.
- Wolf EM, Wilk RM, Richmond JC. Arthroscopic Bankart repair using suture anchors. Oper Tech Orthop. 1991;1(2):184-191. doi:10.1016/S1048-6666(05)80030-8.
- Imhoff AB, Ansah P, Tischer T, et al. Arthroscopic repair of anterior-inferior glenohumeral instability using a portal at the 5:30-o'clock position: analysis of the effects of age, fixation method, and concomitant shoulder injury on surgical outcomes. Am J Sports Med. 2010;38(9):1795-1803. doi:10.1177/0363546510370199.
- Armangil M, Basat HC, Akan B, Karaduman M, Demirtas M. Arthroscopic stabilization of anterior shoulder instability using a single anterior portal. Acta Orthop Traumatol Turc. 2015;49(1):6-12. doi:10.3944/AOTT.2015.14.0035.
- Çiçek H, Tuhanioğlu Ü, Oğur HU, Seyfettinoğlu F, Çiloğlu O, Beyzadeoğlu T. Single anterior portal: a better option for arthroscopic treatment of traumatic anterior shoulder instability? Acta Orthop Traumatol Turc. 2017;51(4):298-302. doi:10.1016/j.aott.2017.03.002.
- Ng DZ, Lau BPH, Tan BHM, Kumar VP. Single working portal technique for knotless arthroscopic Bankart repair. Arthrosc Tech. 2017;6(5):e1989-e1992. doi:10.1016/j.eats.2017.07.021.
- Frank RM, Mall NA, Gupta D, et al. Inferior suture anchor placement during arthroscopic Bankart repair: influence of portal placement and curved drill guide. Am J Sports Med. 2014;42(5):1182-1189. doi:10.1177/0363546514523722.
- Kocaoglu B, Guven O, Nalbantoglu U, Aydin N, Haklar U. No difference between knotless sutures and suture anchors in arthroscopic repair of Bankart lesions in collision athletes. Knee Surg Sports Traumatol Arthrosc. 2009;17(7):844-849. doi:10.1007/s00167-009-0811-3.
- Cho NS, Lubis AMT, Ha JH, Rhee YG. Clinical results of arthroscopic Bankart repair with knot-tying and knotless suture anchors. Arthroscopy. 2006;22(12):1276-1282. doi:10.1016/j.arthro.2006.07.005.
- Ng DZ, Kumar VP. Arthroscopic Bankart repair using knot-tying versus knotless suture anchors: is there a difference? Arthroscopy. 2014;30(4):422-427. doi:10.1016/j.arthro.2014.01.005.
- Thal R. Knotless suture anchor: arthroscopic Bankart repair without tying knots. Clin Orthop Relat Res. 2001;390:42-51. Available at: https://journals.lww.com/corr/Abstract/2001/09000/Knotless_Suture_Anchor__Arthroscopic_Bankart.7.aspx.
- Rhee YG, Ha JH. Knot-induced glenoid erosion after arthroscopic fixation for unstable superior labrum anterior-posterior lesion: case report. J Shoulder Elbow Surg. 2006;15(3):391-393. doi:10.1016/j.jse.2005.03.010.
- Rhee YG, Lee DH, Chun IH, Bae SC. Glenohumeral arthropathy after arthroscopic anterior shoulder stabilization. Arthroscopy. 2004;20(4):402-406. doi:10.1016/j.arthro.2004.01.027.
- Ahammad PP, Mundakkal A, Khan PS. Arthroscopic Bankart repair with inferior glenohumeral ligament tightening using the antegrade suture passer. JISAKOS. 2023;8(4):123-130. doi:10.1016/j.jisakos.2023.03.004.
- Sims LA, Shin JJ, Judy RP, Lin A. Arthroscopic soft tissue stabilization: single anterior portal technique. Ann Joint. 2017;2(11):3885. doi:10.21037/aoj.2017.10.07.
Cite this article
Dekker TJ, Peebles LA, Provencher MT. Placing knotless suture anchor through mid-glenoid portal. J Med Insight. 2024;2024(f2). doi:10.24296/jomi/f2.
Procedure Outline
Table of Contents
- The mid-glenoid portal/anterior-inferior portal should be made approximately 1 cm lateral from the joint line of the humeral head and just superior to the subscapularis through the rotator interval. Portal placement is guided by the preliminary placement of an 18-guage spinal needle to ensure the trajectory of the portal is correct.
Portal placement avoids injury to the labrum and should be determined after assessing both the thickness of the local soft tissues and the size of the relevant bony architecture.
- The drill hole for the knotless anchor should be drilled approximately 1–2 mm onto the face, or from the cliff, of the glenoid.
- The drill can be malleted down lightly to hold the drill in place while drilling anchor holes.
- The inferior-most anchor is placed first. Using the anterior portal, a drill hole is made on the lower part of the glenoid, about 2 mm onto the articular surface. This is usually at the 5:00 or 5:30 position. Ensuring this anchor is placed sufficiently low is crucial for effectively addressing the pathology and achieving a successful repair. A suture anchor is placed at a 45-degree angle to the glenoid face using a mallet. Through the anterior portal, a tissue penetrator with a monofilament wire loop is inserted through the capsule and under the torn labrum at the 5:00–5:30 position. The tissue is grasped more inferiorly than the anchor to achieve an inferior to superior and lateral to medial capsular shift. Be cautious of the axillary nerve near the 6:00 position.
- After passing through the soft tissue, the wire loop is released, and the penetrator is withdrawn from the capsule and removed from the shoulder.24
- The labral tape is passed a short distance through the eyelet of the knotless fixation device before the construct is inserted into the glenoid.
The flatter, non-cylindrical labral tape provides a flat construct that wraps around the labrum to reaffix it to the face of the glenoid.
- A hemostat can be used to hold the tape as it is placed into the drill hole, and a mallet is used to drive the interference portion of the plastic implant to a marked depth on the percutaneous insertion device denoted by a black line.
- Once the suture anchor is securely affixed, the insertion device is unloaded and pulled out of the portal with 6 counterclockwise turns.
- Tightening the anterior band of the IGHL is crucial for a successful Bankart repair. This is done by suturing the labrum at the 6-o’clock position to an anchor at the 5-o’clock position, creating a south-to-north capsulolabral shift, typically using a curved suture passer.23
Transcription
And so now, we're going to go in and grab this blue. Go ahead, you want to hold? And then we’re going to load up the labral tape. And so here’s the labral tape. It's a non-cylindrical suture - in other words, it’s a small flat, just polyester blended tape. So we’re going to go around the labrum like this. Nice flat construct on there, and then it's going to be held in a knotless fixation device that gets sunk into the glenoid. And so here's what we have for our labral tape coming out. So now, we're going to drill. I want to get a nice robust repair, so that's where that stitch is coming out right there. So go ahead and take the spear out. The other thing is I want to make sure we're just at the edge of the cliff - maybe 1 to 2 mm on the face of the glenoid. I'm always looking at my other anchor. I don't want to pop that one out with another drill, so I want to move far enough away and at an angle that's going to be good for this. So you can see, I’m bringing the angle up a little bit. So we mallet it just to hold it in position - drill. So here is the anchor - it’s an interference anchor. The tape is going to pass through this eyelet, and then this device is going to go and be malleted down over the eyelet to seal the tape in place with the eyelet. And so we basically just passed a short distance the shorter you pass, the better makes it easier to pull through. So I pulled it, pulled it - and hemostat please - and then we hemostat it as we go down the shoulder. And we're gonna put that in the hole right here. We’re going to pull these individually. What you’re going to see happening on the screen is you can see how it tightens it down - see that right there? So once you get it to optimal tension, the next thing you do is you’re going to do is mallet it so that the plastic implant - this peak plastic yellowish implant comes in contact with the bone. Once you’re at the bone, you take off this little orange tab, and now you mallet the interference portion all the way down to the black line. Keep going - you’ll start hearing the pitch change - keep going. You just want to make sure this goes down deep enough and there you go. Now we take this six counterclockwise turns to unload the device, and we pull it out.